The only wiring required is to splice the monitor's power line into the car's reversing light cable at the front of the car and the camera at the back of the car.
When you select reverse gear the camera and monitor are activated and you get a clear view of the area behind your vehicle.
The included bullet style camera is IP65 rated and can be mounted behind the rear windshield or outside the vehicle as required.
| General |
|
| Transmission Frequency |
ISM 2,400~2,483 MHz |
| Transmission Power |
10mW |
| Operating Frequency |
2414MHz/2432MHz/2450Mhz/2468MHz |
| Effective Range |
50m(Min) |
| Modulation Mode |
FM |
| Video Gain Control |
Automatic |
| Operating Temperature |
-10 ~ +50 degrees |
| Storage Temperature |
-20 ~ +60 degrees |
| Operating Humidity |
< 85% |
| Camera |
|
| Imaging Sensor Type |
CMOS |
| Picture Total Pixels |
628 x 582 |
| Horizontal Resolution |
380 TV Lines |
| Viewing Angle |
110 degrees |
| Minimum Illumination |
5Lux f/1.2 |
| Ingress Protection |
IP65 |
| Power Supply |
DC 12V |
| Dimensions |
31 x 32 x 28mm (main body) |
| Weight |
50g (main body) |
| Display |
|
| Display Type |
2.4" TFT |
| LCD Resolution |
480 x 240 pixels |
| LDD Contrast Ratio |
150:1 |
| Power Supply |
DC 12V |
| Dimensions |
85 x 93 x 43mm |
| Weight |
105g |