This kit contains all you need to enable safe reversing with confidence, virtually eliminating blinds spots. The Monitor/Mirror simply fastens over your vehicles existing rear view mirror and the camera is mounted above your Number plate. When reverse gear is selected, a colour video image is instantly displayed on the in-built 4.3" TFT LCD screen.
- Video display turns on automatically while reversing
- Inbuilt 4.3" colour TFT-LCD screen
- Monitor resolution: 480x 234 pixels
- Anti-glare blue glass mirror
- Secondary video input available
- Power: 12VDC (10W maximum power consumption)
Camera:
- 8 x infrared LEDs offer enhanced night time operation
- Easily mounts above your number plate
- 110Deg. horizontal viewing angle
- Power 12VDC 200mA
Installation:
- Mount the number plate camera above your number plate at the rear of the vehicle
- Run the camera cable to the male RCA video plug on the 10m video extension lead and plug in
- Run the 10m video extension lead to the front of your vehicle & plug into the RCA connector marked Video 2 on Lead B
- Clip the rear vision mirror / monitor into position over your existing rear view mirror
- Plug the Din plug on Lead B into the rear of the mirror/monitor and run cable to under dashboard area
- Wire the camera power leads (Red +12V / Black Ground)
- Connect the Monitor power leads (Red +12V / Black Ground)
- Important: For the unit to function correctly, the Green wire must be connected to the + output connection for your vehicles reversing lights, this will allow the system to operate automatically when reversing gear is selected.
The Video 1 RCA Input is not used in this kit and can be used for any other RCA video input required